Industrial display is the equipment applied in the industrial environment. How to ensure the normal service life of the equipment in the complex industrial environment? What are the requirements and precautions for the cleanliness of industrial displays? Touch small make up to give you a brief introduction.
1. Precautions for cleaning
Note: please disconnect the power supply before cleaning
Industrial tablets are designed to protect their surfaces from scratches from harder materials.
The surface of the industrial display is polarized, and the liquid can also be penetrated to avoid direct spraying of detergent on the surface of the LCD; Some solvents will corrode the polarizer and avoid non-specialist cleaners.
2. Cleaning requirements
Before cleaning, please first turn off the power switch, and remove the power plug and video card connector plug.
Move the product to a place with good natural light so you can see where the dust and dirt are.
3. Cleaning methods
Dust the LCD surface with a leather tiger (blowing ash ball, ear ball) to ensure that no coarse particles of dirt adhere to the LCD surface.
Using a slightly moistened wipe, wipe from the center of the screen to the sides; If you can't remove the obvious stains, use a liquid crystal cleaner with a moistened wipe.
After wiping, if the surface of the industrial display is wet, wipe with a dry wipe.
4. Cleaning supplies
Leather tiger (blow ash ball, ear wash ball)
Use absorbent cotton or soft and smooth cloth or liquid crystal cloth.
Slightly moisten the wiper with water or use a liquid crystal cleaner to moisten the wiper.
Some cleaners may need to be diluted first. Please follow the instructions for liquid crystal cleaners.