通用banner
your current location : Home >> News >> Industry news

contact usContact Us

Shenzhen guanjingda electronic co. LTD

Tel:0755-2958 0667

Fax:0755 2995 0300

email:75787678@qq.com

Add:5th floor, building 6, hezhou village industrial zone, xixiang street, bao 'an district, shenzhen city, guangdong province

URL  :   www.sz-gjd.com 

Website:en.sz-gjd.com

The use method of conductive tape for LCD screen and related matters

2019-10-10
Times

1. A structural member shall be used to fix the LCD screen together with the conductive rubber strip and PCB plate. Conductive rubber strip, conductive strip, conductive silica strip is the common name of conductive silica connector.


2. No welding is required to eliminate the damage to thermal devices. Instead of welding, conductive silicone rubber can be used to connect some vulnerable electronic components.


3. It can also replace welding in high temperature and radiation occasions. At this time, conductive silicone rubber not only provides a good conductive and electrical connection, but also makes the connection point in a sealed state, which plays a role of moisture-proof and anti-corrosion. "Zero tapping force" to prevent the LCD glass damage; Will not damage the contact surface;


Forming a layer of air-tight closure, so that the printed circuit board in the adverse environment from atmospheric corrosion to ensure a good connection; It has the function of buffering and anti-shock. Easy to adapt to a wide variety of contact methods; The display can be inserted or removed multiple times.


5. Cut off a small piece of conductive rubber strip to repair the position of the electric contact head of the remote control. For the iron strip at the battery electrode of the remote control, it is easy to be corroded.

 段码液晶屏,LCD液晶屏,VA黑膜液晶屏

Notes!


Because the electrode spacing can be made very small, so it is suitable for driving the product with many roads, the price is cheap, can help to reduce the cost; Soft and elastic, easy to position, mainly used for LCD LCD screen


Signal connection with PCB board, good conductivity and stability.


When we use conductive tape, we must pay attention to wearing insulating gloves before operation. Although the conductive strip itself is not conductive, it does not mean that the object connected by the conductive strip is not conductive.


There is also a need to pay attention to vigilance, must ensure that the conductive rubber strip connected to the object completely cut off the power supply after careful operation, otherwise it will occur small electric shock, big explosion of the situation!


label

Recently Viewed: